通信达公式怎么用？ 通达信MACD构型解析副图公式源码

通信达公式怎么用？ 通达信MACD构型解析副图公式源码 www.beexiaomifeng.com小编为您提供

DIF:100*(EMA(CLOSE,12)-EMA(CLOSE,26));
DEA:EMA(DIF,9);
MACD:(DIF-DEA)*2,COLORSTICK;
{底部结构预警}
死叉:=CROSS(DEA,DIF);
N1:=BARSLAST(死叉),NODRAW;{最近一次死叉的位置}
N2:=REF(BARSLAST(死叉),N1+1),NODRAW;{倒数第二次死叉与倒数第一次死叉的区间}
N3:=REF(BARSLAST(死叉),N2+N1+2),NODRAW;{倒数第三次死叉与倒数第二次死叉的区间}
CL1:=LLV(C,N1+1),NODRAW;{最近一次死叉后，最低收盘价}
DIFL1:=LLV(DIF,N1+1),NODRAW;
CL2:=REF(CL1,N1+1),NODRAW;{倒数第二次死叉与倒数第一次死叉之间的最低收盘价}
DIFL2:=REF(DIFL1,N1+1),NODRAW;

CL3:=REF(CL2,N1+1),NODRAW;{倒数第三次死叉与倒数第二次死叉之间的最低收盘价}
DIFL3:=REF(DIFL2,N1+1),NODRAW;
PDIFL2:=IF(DIFL2>0,INTPART(LOG(DIFL2))-1,INTPART(LOG(-DIFL2))-1);
MDIFL2:=INTPART(DIFL2/POW(10,PDIFL2));
PDIFL3:=IF(DIFL3>0,INTPART(LOG(DIFL3))-1,INTPART(LOG(-DIFL3))-1);
MDIFL3:=INTPART(DIFL3/POW(10,PDIFL3));
MDIFB2:=INTPART(DIF/POW(10,PDIFL2));
MDIFB3:=INTPART(DIF/POW(10,PDIFL3));
直接底背离:=(CL1MDIFL2) AND (MACD<0 AND REF(MACD,1)<0) AND MDIFB2<=REF(MDIFB2,1);
隔峰底背离:=(CL1MDIFL3) AND (MACD<0 AND REF(MACD,1)<0) AND MDIFB3<=REF(MDIFB3,1);
B:直接底背离 OR 隔峰底背离,NODRAW;
BG:((MDIFB2>REF(MDIFB2,1))*REF(直接底背离,1)) OR ((MDIFB3>REF(MDIFB3,1))*REF(隔峰底背离,1)),NODRAW;
底背离消失:=(REF(直接底背离,1) AND DIFL1<=DIFL2 ) OR (REF(隔峰底背离,1) AND DIFL1<=DIFL3);
DRAWTEXT(TFILTER(B,MACD>0,1),(DIF+MACD),'钝化'),COLORRED;
STICKLINE(B OR BG,DIF,DEA,1,0),COLORRED;
DRAWTEXT(TFILTER(底背离消失,B,1),(DIF+MACD),'消失'),COLORYELLOW;
DRAWTEXT(TFILTER(BG,MACD>0,1),DIF*1.1,'结构形成'),COLORGREEN;
金叉:=CROSS(DIF,DEA);
M1:=BARSLAST(金叉),NODRAW;
M2:=REF(BARSLAST(金叉),M1+1),NODRAW;
M3:=REF(BARSLAST(金叉),M2+M1+2),NODRAW;
CH1:=HHV(C,M1+1),NODRAW;
DIFH1:=HHV(DIF,M1+1),NODRAW;
CH2:=REF(CH1,M1+1),NODRAW;
DIFH2:=REF(DIFH1,M1+1),NODRAW;

CH3:=REF(CH2,M1+1),NODRAW;
DIFH3:=REF(DIFH2,M1+1),NODRAW;
PDIFH2:=IF(DIFH2>0,INTPART(LOG(DIFH2))-1,INTPART(LOG(-DIFH2))-1);
MDIFH2:=INTPART(DIFH2/POW(10,PDIFH2));
PDIFH3:=IF(DIFH3>0,INTPART(LOG(DIFH3))-1,INTPART(LOG(-DIFH3))-1);
MDIFH3:=INTPART(DIFH3/POW(10,PDIFH3));
MDIFT2:=INTPART(DIF/POW(10,PDIFH2));
MDIFT3:=INTPART(DIF/POW(10,PDIFH3));
直接顶背离:=(CH1>CH2 ) AND (MDIFT20 AND REF(MACD,1)>0) AND MDIFT2>=REF(MDIFT2,1);
隔峰顶背离:=(CH1>CH3 AND CH3>CH2 ) AND (MDIFT30 AND REF(MACD,1)>0) AND MDIFT3>=REF(MDIFT3,1);
T:直接顶背离 OR 隔峰顶背离,NODRAW;
TG:((MDIFT2 顶背离消失:=(REF(直接顶背离,1) AND DIFH1>=DIFH2 ) OR (REF(隔峰顶背离,1) AND DIFH1>=DIFH3);
DRAWTEXT(TFILTER(T,MACD<0,1),(DIF+MACD),'钝化'),COLORGREEN;
DRAWTEXT(TFILTER(顶背离消失,T,1),(DIF+MACD),'消失'),COLORYELLOW;
STICKLINE(T OR TG,DIF,DEA,1,0),COLORGREEN;
DRAWTEXT(TFILTER(TG,MACD<0,1),DIF*1.02,'结构形成'),COLORMAGENTA;


?

更多股票公式相关资讯请关注www.beexiaomifeng.com